Panamera S (970) V8-4.8L (2010)
2.1. Clip in additional seal at the top.
2.2. Position front edge of additional seal on the guide rail for the B-pillar cover.
2.3. Pull off the protective film on the front edge -A- and pull it out under the additional seal. Press additional seal on evenly.
2.4. Align additional seal towards the rear.
2.5. Pull off the protective film on the lower edge -B- and pull it out under the additional seal. Press additional seal on evenly.
2.6. Align additional seal at the rear edge.
2.7. Pull off the protective film on the rear edge -C- and pull it out under the additional seal. Press additional seal on evenly.
Subsequent work
1. Install rear door window.
Replacing Front Rubber Seal For Rear Door
Replacing Front Rubber Seal For Rear Door
Removing front rubber seal for rear door