Panamera S (970) V8-4.8L (2010)
3. Affix seal.
3.1. Lengthen protective film with adhesive tape -1- .
3.2. Pull off the extended protective film at the top edge and pull it out from under the seal. Evenly press down the seal at the same time.
4. Check to ensure seal is fitted securely and is flush.
Replacing Rubber Seal For Rear Door Sub-Frame
Replacing Rubber Seal For Rear Door Sub-frame
Preliminary work
1. Remove rear B-pillar cover.
Replacing rubber seal for rear door sub-frame
1. Pull off rubber seal.
INFORMATION: Immediately before sticking on, wash off the areas on which you intend to stick the seal using isopropanol to ensure that all traces
of silicone, grease and oil are completely removed.
2. Install new rubber seal.