Panamera S (970) V8-4.8L (2010)
Hood Hinge: Service and Repair
Removing And Installing Front Lid Hinge
Technical values
Preliminary work
1. Remove the front lid.
2. Remove cowl panel cover.
Removing front lid hinge
INFORMATION: Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the
opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
1. Unscrew fastening screws -1- .
2. Remove the hinge.
Install front lid hinge
INFORMATION: Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the
opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
1. Roughly align the hinge according to the old impressions.
2. Screw in fastening screws and tighten to the specified tightening torque
-
Tightening torque: 20 Nm (15 ftlb.).
Subsequent work
1. Install cowl panel cover.
2. Install the front lid.