Panamera S (970) V8-4.8L (2010)
2. Press the two locking lugs -arrow- on the control unit and unhook the control unit from the lid.
Installing control unit for rear lid
1. Hook control unit onto rear lid -1- and clip it in -2- .
2. Plug in electric connectors -2, 3- at the control unit until they engage securely.
3. Plug in and lock electric connector -1- .
Subsequent work
Subsequent work for control unit for rear lid
1. Install trim panel for tailgate.
2. If the control unit was replaced, the control unit must be adapted to the vehicle using the 2nd generation PIWIS Tester 9818.