Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-957004.png)
4. Drill holes on the front apron using a paring drill bit Conical paring drill bit Nr.128
-
Diameter: 25 mm.
Installing number plate cover (Japan).
1. Align the number plate cover on the front apron with the help of the cut-out.
INFORMATION: Self-tapping screws are used to secure the number plate cover. When fitting the number plate cover for the first time (e.g. on a
new front apron), the screws can be screwed directly into the front apron. There is no need to drill any holes.
2. Screw in fastening screws -1- .
3. Position the number plate.
4. Screw in fastening screws -2- .
