Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-961003.png)
2. Push in B-pillar cover from the top and align it according to the marking.
3. Screw in fastening screws -2- and tighten to the specified torque
-
Tightening torque: 3.5 Nm (2 ftlb.)+10°.
4. Push window guide fully into the B-pillar cover.
5. Place roof moulding in installation position.
6. Check that the rubber seal is fitted correctly in the B-pillar cover.
