Panamera S (970) V8-4.8L (2010)
3.1.
Disconnect cable plugs on the two sensors -1 and 2- (prevents damage to the plugs during subsequent work). Ensure that you detach the
cable plug from the spring strut -1 - vertically (risk of breakage).
3.2.
Detach and expose wiring harness at the plenum panel wall. -3-
3.3.
Remove fastening screws on the left plenum panel wall.
- Mounting for left-hand side plenum panel wall
3.4.
Remove plenum panel wall.
4. Detach relay box from the strut. To do this, press the plastic hook -1- and set the relay box aside.
5. Clamp heater and coolant hoses on both sides of the centre plenum panel wall at the top using suitable hose clamps.
-
Clamped hoses (examples of hose clamps that can be used)