porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Dashboard Support|Page 5333 > < Removing and Installing Dashboard Support|Page 5331
Page 21
background image

9. Screw in the three fastening screws -4- at the left and right side.

-

Tightening torque: 3.2 Nm (2 ftlb.)

10. Screw in the hexagon socket screw -5- at the sides of the dashboard.
11. Replace and tighten the tie-wraps on the line for the passenger airbag unit.
12. Replace the tie-wraps on the two wire harnesses going to the centre console, join them at the dashboard and tighten them.

13. Plug in electric plug connections for the passenger airbag unit.

Removing and Installing Dashboard Support|Page 5333 > < Removing and Installing Dashboard Support|Page 5331