Panamera S (970) V8-4.8L (2010)
1. Fit fabric lining -1- from above.
2. Insert guide elements -2- so that they are centered in the sliding roof frame.
3. Secure fabric lining at the front.
3.1. Lift up the guide elements -2- ( -A- ) and slide them into the cut-outs provided for them in the fabric lining -1- ( -B- ).
INFORMATION:
-
Never make alterations to the micro-self-locking screws, which have a negative effect on the bonding (e.g. using lubricant, loosening bolts and
screwing them down again).
-
Replace micro-self-locking screws.
3.2. Screw in front fastening screws -3- .
4. Secure fabric lining at the rear.
4.1. Lift up the guide elements -2- ( -A- ) and slide them into the cut-outs provided for them in the fabric lining -1- ( -B- ).
INFORMATION:
-
Never make alterations to the micro-self-locking screws, which have a negative effect on the bonding (e.g. using lubricant, loosening bolts and
screwing them down again).
-
Replace micro-self-locking screws.
4.2. Screw in rear fastening screws -3- .