Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-1004009.png)
1. Check that rubber supports -9- are fitted and check condition. Replace if necessary.
2. Place front part of C-pillar trim in installation position -A- .
2.1.
Make sure that the speed nut is positioned correctly.
3. Clip in front part of C-pillar trim.
3.1.
Clip in outer fixing clips -B- .
3.2.
Clip in inner fixing clips at the bottom -C- .
4. Screw in fastening screws -8-
-
Tightening torque: 1.7 Nm (1.5 ftlb.) at the top.
