Panamera S (970) V8-4.8L (2010)
3. Remove cushion clips from the cushion carrier.
3.1. For seats with and without seat heating.
3.1.1. Cut the metal cushion clips in the sequence shown -a to d- using side cutters.
3.1.2. Remove cover -9- from the padding -arrow A- .
3.1.3. Remove remaining parts of cushion clips.
3.2. For seats with seat heating and air conditioning.
INFORMATION: The cushion clips -a and c- are metal and must be cut using side cutters. The cushion clips -b- are plastic and can be removed.
3.2.1. Cut the cushion clips in the sequence shown -a to c- using side cutters and remove them from the cushion.
3.2.2. Remove cover -9- from the padding -arrow A- .
3.2.3. Remove remaining parts of cushion clips.
Installing cover for rear seat
INFORMATION:
-
Always replace metal cushion clips.
-
Reuse plastic cushion clips. Replace defective cushion clips.
1. Fit cushion clips on the cushion carrier.
1.1. For seats with and without seat heating.
1.1.1. Place cover -9- on the padding -arrow B- and align with the contour of the padding.