porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Electric Parking Brake Switch|Service and Repair|Page 2533 > < Removing and Installing Control Unit For Distance Measuring Sensor|Page 2529
Page 1
background image

Electric Parking Brake Switch: Service and Repair

Removing and installing actuator for electric parking brake (EPB)

Removing and installing actuator for electric parking brake

Information
The actuator for the parking brake is located on the driver's side, at the left under the steering wheel -arrow-.

Installation position of EPB actuator

1. The parking brake actuator is clipped into the knee guard at four points, two at the bottom -arrows- and two at the top.

Unclipping actuator

1.1.

Open the driver's door. Using a plastic wedge, carefully pry the clips out of the surround on the actuator from underneath. Make sure not to
damage the leather!

2. Release the lock on the connector -arrow- and pull off the connector.

Releasing lock on connector

Electric Parking Brake Switch|Service and Repair|Page 2533 > < Removing and Installing Control Unit For Distance Measuring Sensor|Page 2529