Panamera S (970) V8-4.8L (2010)
Brake Light Switch: Service and Repair
Removing And Installing Brake Light Switch
Technical values
Preliminary work
1. Remove front footwell outlet vent on driver's side.
Removing brake light switch
INFORMATION: The brake light switch is located in the left footwell next to the brake pedal.
1. Unplug electric plug connection -1- ( -A- ).
2. Pull brake light switch -3- out of frame -2- ( -C- ).
3. Release frame -2- of brake light switch -B-.
4. Press frame -2- up and out of the retaining bracket.
Installing brake light switch
INFORMATION:
The brake light switch sensor works without contact.
For the switch to work correctly, there must be a specified air gap between the sensor and the baffle plate on the brake pedal.
The baffle plate must not touch the sensor.
When installing, make sure that the brake pedal is in the normal position.
1. Before installing, press brake light switch -1- out of the frame -2- until the underside is flush with the frame.