Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-1130002.png)
2. Insert brake light switch -1- with frame -2- into the retaining bracket from above until the frame s retaining clip latches securely in the retaining
bracket -A-.
3. Insert electric plug connection -3- ( -B- ).
Adjusting brake light switch
1. Make sure that the brake pedal is in the normal position.
2. Hold brake pedal in one hand and press down on the sensor in the frame with the other until the sensor surface is touching the counter plate on the
brake pedal.
INFORMATION: Between the sensor and counter plate in the basic setting there is a gap of: -> Adjustment value: 1 mm+/-0.5 mm
