Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-214005.png)
Positioning and centering pressure piece VW454 on wheel hub
4. Slowly extend the large ram and place it onto the pressure piece VW 454. Carefully press out the wheel hub -direction arrow-.
Pressing out wheel hub
Removing wheel bearing
5. Remove the ring 3.
Pressing out wheel bearing, 1 - large ram, 2 - pipe T10205/5
6. Place pipe T10205/5 -2- under the workshop press and position the wheel bearing housing. Place the workshop press's large ram -1- onto the
wheel bearing.
