Panamera S (970) V8-4.8L (2010)
3.1. Position the DME control unit and holder and secure with the fastening nut -2- and the two fastening screws -1-. -> Tightening torque: 9.7
Nm (7.5 ftlb.) -> Tightening torque: 9.7 Nm (7.5 ftlb.)
Subsequent work
Subsequent work on DME control unit
1. If the control unit was replaced, the new control unit must be adapted to suit the vehicle using the 2nd generation PIWIS Tester 9818.
2. Position the cross panel at the right and secure the section with the two fastening screws.
3. Install cowl panel cover.