Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-401003.png)
-
Do not use any sealant containing silicone or silicone spray when the injection system is open. Traces of silicone drawn in by the engine are not
combusted and damage the oxygen sensors.
INFORMATION: The tool numbers refer to the individual parts of the tools in the repair kit T10133 and the supplement set T10133/11-15 (unless
indicated otherwise).
1. Pull cable plugs off the injectors. -arrows-
2. Remove screw on retainer and remove retainer from the injectors -> Retainer for injectors. To do this, use both hands to pull off the retainer
against the resistance of the upper damping rings. Tilt the retainer carefully back and forth with a pliers if necessary and remove it.
3. Pull injector out of the cylinder head by hand (use a glove.).
If the injector is stuck in the cylinder head due to coking of the injector tips, proceed as follows:
4. Grip injector at the connecting taper at the top using a suitable open-ended wrench and carefully turn the injector back and forth without using
force (if any part of the injector body is damaged during removal, the complete injector must be replaced). -> Removing injector
5. Bolt impact hammer no. 3 to adapter 9757 -1-.
