Panamera S (970) V8-4.8L (2010)
1. Wait 1 minute after disconnecting the battery.
2. Disconnect electric plug connection.
2.1. Release electric plug connection -arrow- .
2.2. Release the locking clip -a- .
2.3. Open the locking clip -b- and remove the plug connection.
3. Screw off the three fastening nuts -1- on the airbag triggering unit and remove the airbag triggering unit.
Installing triggering unit for airbag
INFORMATION: If a new component (e.g. sensor, airbag control unit, airbag unit) of the airbag system has to be installed, the new component will
be supplied with a bar code sticker (tear-off label).