porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Loosening and Securing Main Wire Harness In Engine Compartment|Page 2763 > < Loosening and Securing Main Wire Harness In Engine Compartment|Page 2761
Page 4
background image

8. Remove TPM control unit and holder.
9. Disconnect electric plug connection from TPM control unit.

10. Disconnect electric plug connection for filler flap opener.

11. Remove side trim panel support.

11.1. Unscrew fastening screws -1- for side trim panel support.
11.2. Remove side trim panel support.

12. Disconnect electric plug connection for rear shock absorber (spring damper).
13. Remove PASM control unit and holder.
14. Disconnect electric plug connection from PASM control unit.
15. Disconnect electric plug connection for ABS.
16. Unclip supply lines for ABS wire harnesses at the underbody, which go to the main wire harness in the luggage compartment.
17. Make sure that all electric plug connections going to the main wire harness in the luggage compartment are disconnected.
18. Release rubber sleeve and pull lines up out of the underbody in the luggage compartment area.
19. Release and disconnect electric plug connection for rear three-point belt at the left and right.
20. Release and disconnect electric plug connection for head airbag unit at the left and right.
21. Release and disconnect electric plug connection for heating element for rear backrest at the left and right.
22. Release and disconnect electric plug connection for wire harness for tailgate at the left and right.
23. Remove sound absorber on rear wheel housing at the left and right.
24. Release and disconnect electric plug connection for acceleration sensor at the wheel housing -arrow-.

Loosening and Securing Main Wire Harness In Engine Compartment|Page 2763 > < Loosening and Securing Main Wire Harness In Engine Compartment|Page 2761