Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-589064.png)
1.2. Remove electric plug connection for main wire harness from the bracket -arrow B-.
1.3. Release and pull off electric plug connection for main wire harness.
1.4. Unclip retaining clips for ABS wire harness.
1.5. Remove ABS wire harness on the wheel carrier holder from the bracket.
2. Disconnect electric plug connection for rotation angle sensor.
2.1. Pull off rubber cover -1- ( -arrow A- ).
2.2. Release and pull off electric plug connection for rotation angle sensor -2- ( -arrow B- ).
3. Disconnect electric plug connection for ABS sensor.
