Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-589161.png)
7. Make sure that all fastenings on the wire harness for the rear right wheel housing are disconnected.
8. Remove entire sub-part of wire harness for rear right wheel housing.
Installing sub-part of wire harness for rear right wheel housing (TPM)
1. Push wire harness for rear right wheel housing (TPM) through towards the interior and fit rubber sleeve.
2. Fit sub-part of wire harness in the rear right wheel housing at all five fastening points -A- and plug in and lock all plug connections.
