Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-460003.png)
Hydraulic control unit screws
5. Screw two M6 x 95 mm screws -> Part No. 900.385.126.01 approx. 10 mm into screw holes 17 and 11.
6. Unscrew the remaining screws in reverse order from 16 to 1 and position the hydraulic control unit on the two long screws.
Hydraulic control unit screws
7. Remove hydraulic control unit and wire harness.
Installing hydraulic control unit
Information
Before installing the electrohydraulic control unit, check the sealing surfaces of the control unit and the sealing surfaces of the transmission for
damage and soiling. Damaged or soiled parts must not be used. Ensure absolute cleanliness when installing the electrohydraulic control unit.
1. Press oil pump adapter -right arrows- into the transmission.
Oil pump adapter
2. Fix the hydraulic control unit in place by screwing two M6 x 95 mm screws -> Part No. 900.385.126.01 approx. 10 mm into screw holes 17 and
11.
