Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-460004.png)
Hydraulic control unit screws
3. The hydraulic control unit must be fitted at the correct position on the connection piece for the oil pump adapter -arrows- and must be flush in the
transmission housing.
Oil pump adapter
4. Tighten fastening screws on the hydraulic control unit cross-wise and hand-tight.
5. Tighten the hydraulic control unit screws in the specified sequence. -> Tightening torque: 9 Nm (6.5 ftlb.)
Hydraulic control unit screws
6. Fit cable plugs -1, 2-.
