Alliance/Encore L4-1721cc 105 CID (1985)
![background image](/renault/alliance/encore/l4-1721cc_105_cid/Page-274002.png)
Figure 2
4.
Install one of the filter retaining bolt and washer in the location shown in Figure 2.
NOTE:
THIS BOLT SHOULD BE THREADED IN FAR ENOUGH TO ALLOW THE SLOTTED LEG OF THE NEW FILTER TO
BE SLID BETWEEN THE BOLT WASHER AND VALVE BODY.
Figure 3
5.
Install filter seal PN T3065118 on new filter as shown in Figure 3.
Figure 4
6.
Position the new filter on the valve body as shown in Figure 4.