Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)02 · General information
02 · General

Identification number locations

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Vehicle identification number › Identification number locations
General informationIdentification number locations

IDENTIFICATION NUMBER LOCATIONS

Engine number

’K’ Series Engine: Stamped on the front face of the cylinder block adjacent to the gearbox.

’D’ Series Engine: Stamped on the front face of the cylinder block adjacent to the gearbox.

’L’ Series Engine: Stamped on the front face of the cylinder block adjacent to the alternator.

’T’ Series Engine: Stamped above No.4 cylinder block core plug.

Gearbox number

Manual Gearbox: Stamped on a label attached to the front face of the clutch housing.

Automatic Gearbox: Stamped on a plate attached to the bottom face of the gearbox.

Body number

The body number is stamped on a plate fixed to the floor to the RH side of the spare wheel compartment.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.