Final drive
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- General data › Final drive
InformationFinal drive
FINAL DRIVE
Ratios:
| 1.4 - ’K’ Series | 3.937 : 1 |
| 1.6 - ’K’ Series | 3.765 : 1 |
| 1.6 - ’D’ Series | 4.357 : 1 |
| 2.0 - ’L’ Series | 3.937 : 1 |
| 2.0 - ’T’ Series | 3.938 : 1 |
Road speed at 1000 rev/min in top gear:
| 1.4 ’K’ Series | 31.8 km/h |
| 1.6 ’K’ Series with 185/60 R14 tyres | 31.4 km/h |
| 1.6 ’K’ Series with 185/55 R15 tyres | 31.8 km/h |
| 1.6 ’D’ Series with 185/60 R14 tyres | 31.4 km/h |
| 1.6 ’D’ Series with 185/55 R15 tyres | 31.8 km/h |
| 2.0 ’L’ Series with 185/65 TR14 tyres | 42.6 km/h |
| 2.0 ’T’ Series with 195/55 HR15 tyres | 36.1 km/h |
19.8 mph 19.5 mph 19.8 mph 19.5 mph 19.8 mph 25.5 mph 22.5 mph
STEERING
NOTE: The following steering geometry settings are given in degrees and minutes, decimal parts of a degree and millimetres. Steering and suspension geometry settings are for a vehicle at unladen weight.
| Front wheel alignment - per side | 0° ± 0° 15’ |
| 5J x 14 wheel1 | 0.0 mm ± 1.604 mm |
| 5 /2 J x 15 wheel | 0.0 mm ± 1.710 mm |
| 6J x 15 wheel | 0.0 mm ± 1.710 mm |
| Front wheel camber | 0° ± 0° 45’ |
| 5J x 14 wheel1 | 0.0 mm ± 4.660 mm |
| 5 /2 J x 15 wheel | 0.0 mm ± 5.101 mm |
| 6J x 15 wheel | 0.0 mm ± 5.101 mm |
| Front wheel caster | 1° 38’ ± 1° |
0° ± 0.25°
0° ± 0.75°
1.63° ± 1.0°
| 5J x 14 wheel1 | 10.134 mm ± 6.223 mm |
| 5 /2 J x 15 wheel | 10.860 mm ± 6.670 mm |
| 6J x 15 wheel | 10.860 mm ± 6.670 mm |
| King pin inclination | 10° 41’ ± 1° 10.68° ± 1.0° |
| 5J x 14 wheel1 | 67.110 mm ± 6.223 mm |
| 5 /2 J x 15 wheel | 71.860 mm ± 6.670 mm |
| 6J x 15 wheel | 71.860 mm ± 6.670 mm |
| Turns - lock to lock | 3.48 |
| Rear wheel alignment - toe-in - per side | 0° 22’ ± 0° |
| 5J x 14 wheel1 | 2.305 mm ± 1.604 mm |
| 5 /2 J x 15 wheel | 2.440 mm ± 1.710 mm |
| 6J x 15 wheel | 2.440 mm ± 1.710 mm |
| Rear wheel camber - negative | 0° 50’ ± 0° |
| 5J x 14 wheel1 | 5.202 mm ± 4.660 mm |
| 5 /2 J x 15 wheel | 5.602 mm ± 5.101 mm |
| 6J x 15 wheel | 5.602 mm ± 5.101 mm |
15’ 0.41° ± 0.25°
45’ 0.83° ± 0.75°
Parts & tools for this job For 1995 Rover 400
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 400
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.