Towing
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Lifting and towing › Towing
TOWING
The rear lashing/towing eye (6), must only be used for towing a light vehicle.
Use the front lashing/towing eyes (9) for towing the vehicle on all four wheels from the front.
WARNING: To ensure that the steering does not lock when the vehicle is being towed, it is essential that the ignition key is turned to position ’I’, and remains there while the vehicle is moving. Ensure the following precautions are observed: Do not tow if the gearbox or a drive shaft is faulty. Do not tow if a wheel or drive shafts are touching the body or frame. Ensure the gear lever is in neutral and the handbrake is released. Remember that greater effort than normal will be necessary to apply the brakes if the vehicle is being towed without the engine running.
Automatic gearbox models
When a car with automatic gearbox is to be towed on four wheels from the front, the following precautions must be observed:
The gearbox fluid level must be correct before starting to tow.
The selector must be at ’N’.
The car must not be towed at speeds greater than 30 m.p.h., 50 km/h or for distances which exceed 30 miles, 50 km.
CAUTION: A rear suspended tow must not be attempted as serious damage will be caused to the automatic transmission.
NOTE: A vehicle fitted with an automatic gearbox cannot be started by towing or pushing.
Parts & tools for this job For 1995 Rover 400
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 400
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.