Crankshaft, main and big-end bearings

Make

Rover

Model

Engine & gearbox overhaul T Series Engine Overhaul Manual

Section

Overhaul › Crankshaft, main and big-end bearings

OverhaulCrankshaft, main and big-end bearings

CRANKSHAFT, MAIN AND BIG-END BEARINGS

Crankshaft rear oil seal - remove

1. Remove 5 bolts securing crankshaft rear oil seal housing, remove and discard housing and oil seal.

NOTE: Housing is dowel located.

Gearbox adaptor plate - remove

1. Remove 4 Torx screws securing gearbox adaptor plate to cylinder block; remove plate.

NOTE: Adaptor plate is dowel located.

03 General