saab Workshop Repair Guides

Saab Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Impact Sensor: Service and Repair
Side Airbag Sensor

Side Airbag Sensor

Removal

Turn the ignition switch to OFF.
Disconnect the ground cable from battery, and wait for at least 20 seconds before starting work.
Remove the outer seat belt (FRONT).
Detach the side airbag sensor, and then disconnect the airbag connector.

Installation

Install in the reverse order of removal.

Tightening torque:
T1: 5.9 Nm (0.59 kgf-m, 4.4 ft-lb)

T2: 7.4 Nm (0.75 kgf-m, 5.4 ft-lb)

T3: 10 Nm (1.0 kgf-m, 7.2 ft-lb)

T4: 20 Nm (2.0 kgf-m, 14.5 ft-lb)

T5: 25 Nm (2.5 kgf-m, 18.1 ft-lb)

Restraint Systems > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Service and Repair > Front Sub Sensor > Page 4529

< PREV PAGE NEXT PAGE >