9-3 (9440) L4-2.0L Turbo (2007)
The symbols for sensors and monitors have been simplified. The connector/output side of the sensors have an internal symbol showing the type of output
signal and the other half is a symbol showing the measured quantity.
All internal symbols for the measured quantity may be used with other components.
a. Sensor output with continuous voltage
b. Sensor output with pulsed voltage, e.g. frequency or PWM
The outputs are combined with the following quantity symbols to indicate the correct type of sensor:
c. Temperature
d. Speed/rate via cog or the like
e. Level
f.
Solar
g. Load
h. Angle
i.
Acceleration
j.
Pressure
One type of sensor that can be used for different purposes
k. Hall sensor