9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-1422004.png)
When the exhaust gases pass the oxygen sensor the oxygen content is measured by a chemical reaction. The sensor output voltage is proportional to the
oxygen content and the oxygen content is a reflection of the air/fuel mixture. If the engine receives a richer than normal fuel mixture (lambda less than 1)
the output voltage of the oxygen sensor will be about 0.9 V. If the fuel mixture is weaker than normal (lambda greater than 1) the output voltage of the
oxygen sensor will be about 0.1 V.
The sensor voltage changes very quickly when the lambda value exceeds 1.
The lambda control factor is 1.00 when the lambda control is inactive. As soon as the lambda control is activated the oxygen sensor voltage is allowed to
affect the control correction factor. If the sensor voltage is less than 0.50 V (weak mixture) the correction factor will slowly be raised, i.e. more petrol is
injected. Conversely the correction factor will slowly be lowered if the sensor voltage exceeds 0.50 V.
