9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
9. Check that the brake piston is pressed back in the cylinder. Fit the brake caliper to the steering swivel member (the screws threads should be sealed
using Loctite 242, part no. 749 6268).
Tightening torque 110 Nm (81 ft. lbs.)
10. Fit the wheel sensor.
11. Tighten the hub centre-nut slightly.
Warning: A new hub centre-nut should always be fitted if it has been loosened, as the clamping force of the lock embossing is reduced
when refitted. Use nut with top groove.
12. Fit the wheel.
Tightening torque: 110 Nm (81 ft. lbs.)
13. Lower the car and tighten the hub centre-nut when all four wheels of the car are on the floor.
Tightening torque: 170 Nm + 45° (126 ft. lbs. + 45°)
14. Tighten the nut on the upper bearing. Fit the plastic cover over the nuts.
Tightening torque: 75 Nm (55 ft. lbs.).
15. Pump the brake pedal to advance the brake pistons in the calipers.