9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
Shift Linkage: Service and Repair
Linkage
Linkage
Removing in-car
1. Lift up the main fuse box.
2. Engage 4th gear.
3. Lock 4th gear in the gearbox with 87 92 335 Locking pin.
4. Undo the linkage bracket on the engine mounting.
5. Detach the pinch-bolt clamp from the selector rod.
6. Detach the connection from the gearbox
7. Remove the linkage.
Fitting in-car
1. Fit the linkage to the gearbox and selector mechanism but do not tighten.
2. Screw the linkage bracket to the engine mounting.
Tightening torque: 22 Nm (16 ft. lbs.).