9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-3979012.png)
starting to apply the bead of adhesive.
10. With the assistance of a co-worker, put the windscreen in place.
10.a. Adjust the windscreen up against the roof so that the decor strip is against the edge of the roof.
10.b. Adjust the window laterally so that it is even with the LH and RH edges.
11. Secure the windscreen with tape or straps so that it is held against the edge of the roof.
IMPORTANT: There must be no strain on the windscreen.
12. Reset the glue gun.
13. Allow the adhesive to cure before continuing. Betaseal X 2500 cures in 1 hour at 23 degrees C and 50% relative humidity.
14. Fit the lower portion of the A-pillar trim into place. Fit the upper clip with the strap down in the trim. Press the trim into all clips. Check the fit of
the door weatherstrip.