9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
1. If necessary, fit new O-rings on the injectors. Remove the plugs from the orifices and fit the fuel rail with its injectors in position.
Tightening torque: 8 Nm (5.9 lb ft)
2. Fit the pressure regulator vacuum hose.
3. Screw in the two rail retaining screws.
4. Fit the wiring to the fuel rail.
5. Fit the following connectors: ignition discharge module, injectors, Manifold absolute pressure sensor, mass air flow sensor and Turbo pressure
sensor.
IMPORTANT
Make sure the connectors are fitted to the correct injector, the cables are marked. Spray all the connectors with Kontakt 61 (part no.30 04 520) before
plugging them in.
6. Fit the wiring holder.