9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
Parking Brake Cable: Service and Repair
Handbrake cable
To remove
1. Release the Handbrake.
2. Raise the car.
3. Separate the front and rear exhaust pipe sections.
4. Remove the left-hand rubber exhaust-pipe suspension block.
5. Undo the heat shield's two rear retaining nuts on the left-hand side.
6. Bend the heat shield downwards by a sufficient amount to gain access to the cable equalizer.
7. Remove the return springs and unhook the cables from the actuating levers.
8. Turn the pull cable 90° and separate the cable equalizer.
9. Pull the cable out of the front cable holder and lift out the cable.
10. Support the fuel tank with a single-pillar jack.