9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
Yaw Rate Sensor: Service and Repair
Yaw Rate Sensor
To Remove
1. Remove the centre console.
2. Manual gearbox: Remove the gear lever housing.
Automatic transmission: Remove the selector lever housing, see To remove.
3. Remove the gyro sensor. Use a large screwdriver to prise aside the air duct slightly to access the left-hand screw.
4. Unplug the connector from the gyro sensor.
Note: The connector has a locking device that must be released.
To Fit
1. Plug in the gyro sensor.