9-7X L6-4.2L (2008)
Repair/Engine Protection Shield Replacement).
Important: When placing jack onto the oil pan, pay close attention to not damage the oil level sender.
11. Lower the vehicle and place a floor jack under the oil pan with a block of wood.
12. Raise the engine with the jack just enough to clear the engine mount stud.
13. Remove the left engine mount to bracket nut (1) and the mount from the bracket.
14. Remove the left engine mount bracket bolts (1).
15. Remove the left engine mount bracket.
16. Remove the left frame engine mount bracket bolts.
17. Remove the left frame engine mount bracket, if required.
Installation Procedure
