9-7X L6-4.2L (2008)
1. Install the left frame engine mount bracket, if removed.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the left frame engine mount bracket bolts, if removed.
Tighten the mount bracket bolts to 110 Nm (81 ft. lbs.).
3. Install the left engine mount bracket and secure the bracket with the bolts (1).
Tighten the engine mount bracket bolts to 50 Nm (37 ft. lbs.).
4. Install the left engine mount onto the bracket.
5. Lower the engine onto the engine mounts.
6. Install the right and the left upper engine mount nuts (1).
Tighten the upper engine mount nuts to 70 Nm (52 ft. lbs.).
7. Raise the vehicle and remove the jack from under the vehicle.
8. Install the engine protection shield and secure the shield with the bolts. Refer to Engine Protection Shield Replacement (See: Body and
Frame/Frame/Skid Plate/Service and Repair/Engine Protection Shield Replacement).
9. Install the right and the left lower engine mount nuts.
Torque the lower engine mount nuts to 70 Nm (52 ft. lbs.).
10. Lower the vehicle.
11. Install the left shock module. Refer to Shock Absorber and Spring Assembly Replacement (See: Steering and Suspension/Suspension/Suspension