9-7X V8-6.0L (2008)
Control Module HVAC: Service and Repair
HVAC Control Module Replacement
HVAC Control Module Replacement
Removal Procedure
1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Accessory Trim Plate Replacement).
2. Remove the HVAC control module screws.
3. Remove the HVAC control module from the I/P.
4. Disconnect the electrical connectors from the HVAC control module.
Installation Procedure
1. Connect the electrical connectors to the HVAC control module.