9-7X V8-6.0L (2008)
2. Install the HVAC control module into the I/P.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the HVAC control module screws.
Tighten the screws to 1.9 Nm (17 in. lbs.).
4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Accessory Trim Plate Replacement).