9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
5.
Cut the cable as close as possible to the cable lug and strip off 4 - 5 mm of the insulation.
6.
Crimp the thick yellow 4.0 sq.mm cable and a new section of thin yellow 0.5 sq.mm cable together in the same cable lug, P/N 91 20 791, Figure 4.
7.
Crimp the other end of the thin yellow 0.5 sq.mm cable in the cable lug having part no. 91 20 775, Figure 4.
8.
Fit the cable lug with the two cables to terminal 30 and the cable lug with the thin cable to terminal 86 on relay board position E, Figure 5.
9.
Make sure that the cable lugs snap securely into position on the relay board.
10.
Refit the fuse and relay board in the protective box and install relay, part no. 85 22 310, at position E, Figure 6.
11.
Check that the cooling system fan work, properly.
Warranty Information:
For warranty repairs, use Failure Coding 36530-62-0-01-01. Time Allowance is labor operation no. 36501.
