9000 Hatchback L4-2290cc 2.3L DOHC Turbo EFI (1994)
1
First check that the EDU control module is programmed for the right engine variant. If it is not, press F1 (CHANGE) and change to the correct
variant. Incorrect programming could give rise to display errors. See: Programming
2
If the EDU control module is programmed for the right engine variant, press F3 (CODE), enter the command BO1 and then 206.
3
The figure group displayed may consist of 9 or 6 digits. The 9-digit number always begins with 024y xxxx y, where 24 denotes LH2.4 and
LH2.4.2 The 6-digit number always begins with 022 xxx for LH2.2 and TRIONIC.
4
The digits corresponding to the x's determine the fuel consumption display. An increase or decrease in these figures results in a corresponding
increase or decrease in the fuel consumption display.
The following formulae are used for recalculating fuel consumption
A. Fuel consumption In L/100 km
New consumption = Old consumption * Actual consumption
Consumption displayed by EDU control module
The answer is rounded off to 4 digits.
Example: The car owner states that fuel consumption is 9.6 liters per 100 km but the EDU control module shows 11.2 liters/100 km. The figure
group is 0240 1992 0 (see step 3 above). The new consumption figure will then be calculated using the above formula.
New consumption = 19 92 * 9.6 = 1707.4285
11.2
The new figure group will then be 0240 1707 0.
B. Fuel consumption In MPG
New consumption = Old consumption *Actual consumption*
Consumption displayed by EDU control module
The answer is rounded off to 4 digits.
Example: The car owner states that fuel consumption is 21 MPG but the EDU control module shows 19 MPG. The figure group is 0240 3000 0.
The new consumption figure will then be calculated using the above formula.