900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Suspension Strut / Shock Absorber: Overhaul
DISASSEMBLE
1. Clamp the MacPherson strut in a vice. Compress the spring, using tool No. 88 18 791 and holder No. 88 18 809, or equivalents.
2. Grip the piston rod and remove the nut, using special tool 89 96 662. This nut is of self-locking type and must not be reused.
3. Remove the mounting and top spring seat.
4. Remove the coil spring, gaiter and compression stop.
5. Unscrew the damper, using special tool No. 89 96 670, or equivalent.
6. Lift the damper out of the strut.
ASSEMBLE
1. Inspect the gaiter and bushes for damage.