900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Seat Belt Tensioner: Service and Repair
Deployment For Scrapping Purposes
Scrapping Pyrotechnical Seat-belt Tensioners
WARNING: When scrapping seat-belt tensioners the minimum safety distance is 5 metres. Work on seat-belt tensioners should be carried out
only if you have read the safety instructions and acquainted yourself with the legislation applicable in the country concerned.
The seat-belt tensioner should be activated by means of the detonating device, part No. 84 71 104 (B), and cable assembly, part No. 86 11 469 (A).
1. Disconnect the negative cable from the battery and cover the negative terminal.
2. Remove the B pillar trim.
3. Remove the plastic cover over the seat-belt tensioner and unplug the tensioner's electric connector.
4. Plug the connector (A) on the detonating device (special tool, part No. 84 71 104) into the seat-belt tensioner's connector.