Astra L4-1.8L (2009)
5. For vehicles with a high-pressure headlamp wash system, disconnect the pump wiring harness plug.
Note:
*
Depending on the degree of damage, one or both impact absorbers must be replaced. Inspect for twisted screwing points and bent attachment
surfaces on the front member.
*
During production, impact bars are spot-welded to the side member closure plate. These welds are not replaced during service.
6. Remove the impact bar bracket (1).
*
Drill out 4 spot welds (I and II).
*
Remove the 4 bolts (arrows).
Installation Procedure
