saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Headlining Trim Panel Replacement (Coupe)|Page 11580 > < Headlining Trim Panel Replacement (Coupe)|Page 11578
Page 12
background image

1. Install the 3 rear quarter trim inner paneling clips.
2. Tighten the rear quarter trim seat belt fastening screws.
3. Install the cover cap.

15. Install the upper center pillar trim, left side.

1. Guide the center pillar trim paneling from above in the inner paneling guide front of rear quarter panel.
2. Install the upper center pillar trim paneling.
3. Press in the expanding bolt.
4. Tighten the seat belt bolt.

Tighten the bolt to 35 Nm (26 lb ft).

5. Install the cover cap.
6. Pull the door seal edge spoiler over the molding.

16. Install the upper center pillar trim moulding, right side.

1. Guide the center pillar trim paneling from above in the inner paneling guide front of the rear quarter panel.
2. Install the upper center pillar trim paneling.
3. Press in the expanding bolt.
4. Tighten the seat belt bolt.

Tighten the bolt to 35 Nm (26 lb ft).

5. Install the cover cap.
6. Pull the door seal edge spoiler over the molding.

17. Install the rear compartment cover.
18. Reposition the front seat to the original position.
19. Install the windshield. Refer to Windshield Replacement   (See: Windows and Glass/Windshield/Service and Repair/Windshield Replacement).

Headlining Trim Panel Replacement (Coupe)|Page 11580 > < Headlining Trim Panel Replacement (Coupe)|Page 11578