Astra L4-1.8L (2009)
Trim Panel: Service and Repair
Center Pillar Upper Garnish Molding Replacement (Coupe)
Center Pillar Upper Garnish Molding Replacement (Coupe)
Removal Procedure
1. Remove the center pillar deflection sheave.
*
Remove the bolt.
*
Remove the deflection sheave cover (2).
2. Remove the upper center pillar trim.
*
Release the 2 airbag access panel (1).
*
Release the 2 center pillar clips with a plastic wedge.
Installation Procedure
1. Install the upper center pillar trim.
*
Install the 2 center access pillars.
*
Install the 2 airbag panel clips.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the center pillar deflection sheave.
Tighten the bolt to 30 Nm (22 lb ft).
3. Install the deflection sheave cover.
