Astra L4-1.8L (2009)
2. Install the door sill plate.
Install the 5 clips.
Center Pillar Upper Garnish Molding Replacement (Coupe)
Center Pillar Upper Garnish Molding Replacement (Coupe)
Removal Procedure
1. Remove the center pillar deflection sheave.
*
Remove the bolt.
*
Remove the deflection sheave cover (2).
2. Remove the upper center pillar trim.
*
Release the 2 airbag access panel (1).
*
Release the 2 center pillar clips with a plastic wedge.
Installation Procedure
1. Install the upper center pillar trim.
*
Install the 2 center access pillars.
*
Install the 2 airbag panel clips.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the center pillar deflection sheave.
Tighten the bolt to 30 Nm (22 lb ft).
3. Install the deflection sheave cover.
Center Pillar Upper Garnish Molding Replacement (Sedan)
Center Pillar Upper Garnish Molding Replacement (Sedan)
Removal Procedure