saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Cargo Net Bracket Replacement|Page 11661 > < Cargo Net Bracket Replacement|Page 11659
Page 31
background image

9. Remove the luggage shade retainer (1).

Installation Procedure

1. Install the luggage shade retainer.

Insert and install the luggage shade retainer.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the rear quarter trim panel.

*

Connect the wiring harness plug.

*

Install the 3 clips.

Tighten the 3 bolts to 2.5 Nm (22 lb in).

3. Install the rear compartment sill trim.

Install the 8 clips.

4. Install the upper quarter trim panel.

*

Thread in seat belt.

*

Install the upper quarter trim panel.

*

Install the panel.

5. Install the seat belt.

Tighten the bolt to 35 Nm (26 lb ft).

6. Install the lower quarter trim panel.

Install the 3 clips.

7. Insert the rear seat backrest.

Insert the rear seat backrest into side guide.

8. Install the rear seat backrest.

Tighten the 3 rear bolts to 20 Nm (15 lb ft).

*

Tighten the 3 rear bolts.

*

Fold down the rear seat backrest.

Tighten the 3 front bolts with seat belt buckle to 35 Nm (26 lb ft).

Cargo Net Bracket Replacement|Page 11661 > < Cargo Net Bracket Replacement|Page 11659